Solar for Automotive Industry

November 06, 2026 | Satya Narayan Pandey | 8 Min Read

An automotive plant has many energy hungry processes including; Presses, Welding Lines, Painting Booths, Compressed Air and Assembly Lines. Solar for Automotive can be installed across your plant rooftops, unused land and parking lots/vehicle yards to reduce energy costs, reduce scope 2 emissions and provide answers to OEM’s about your decarbonisation strategy.

Overview

  • Reduce Energy Costs: Solar for Automotive provides energy during the daytime when your plant will have high energy demands. Often cheaper than industrial tariffs.
  • Sustainability ready for OEM’s: Cleaner energy means you can provide a reduced scope 2 emission report to your customers who will be asking about decarbonising their supply chains.
  • Multiple Installation Options: Solar for Automotive can be installed on rooftops, open land, parking lots/vehicle yards (using solar carports) or purchased from off-site (group captive and PPA).

Why Manufacturers Are Going For Solar for Automotive Industry

Vehicle manufacturing sites tend to have long hours and high energy demands from processes such as; Stamping/Pressing Machines, Robotic Welding, Compressors, Heat Treatment, Paint Shop Ventilation/Curing, Lighting and HVAC. This can mean electricity becomes a significant and increasing cost for the business. However, it is one of the easiest parts of your carbon footprint to change.

There are 3 key reasons for solar for automotive:

OEM’s are putting pressure on the supply chain. Car manufacturers are setting climate goals, and the emissions from your suppliers’ factories will be counted in the OEM’s scope 3 emissions. Tier 1 and Tier 2 suppliers are having to provide emission data, strategies to reduce them and increasingly clean energy sources. Often through supplier questionnaires, CDP’s and customer audits.

  1. Increasing and unpredictable tariffs: Solar for Automotive will provide a fixed amount of your energy costs for 25 years.
  2. Competitive advantage: In an industry with tight margins, reducing your power costs and having a credible clean energy strategy can give you an edge.
  3. It’s important to note that solar only helps with the electricity: A large amount of energy in your paint shop and heat treatment line will be from natural gas or other fuels. Solar PV will not replace this, however it will help reduce your scope 2 emissions. If you electrify processes which are currently using fuel then it will help reduce your scope 1 emissions.

Solar for Automotive Manufacturing

Solar is best utilized when it matches your plant.

  1. Usage: Presses, Welding Robots, Paint Shop Fans/Pumps, Compressors, Chillers, Lighting & HVAC. Solar will offset the total demand of the plant and will not require any special wiring.
  2. Daytime Usage: Most automotive plants operate during the day meaning solar will provide a large percentage of your onsite usage.
  3. Large Spikes: Press machines and welding lines can cause large spikes in energy. Solar will not provide this energy. This will come from the grid and if batteries are installed. Solar will reduce the amount of energy you purchase.
  4. Multi-Shift Plants: Typically multi-shift plants will provide a percentage of your annual energy. This is usually achieved with rooftop solar at around 15-35%. Ground mounted/offsite will provide a larger percentage. A study can be carried out with your load data to find out exactly how much.
  5. EV Charging: Solar can be used to provide EV charging for employee vehicles, logistics fleets and EV testing vehicles. This means you can charge during the day.
  6. Battery (Optional): Batteries can be used to reduce peak demand charges or to flatten spikes however will only be beneficial if your tariff and load profile will benefit from it.

Costs of Solar for Automotive

  1. Cheaper per unit: Solar for Automotive is usually cheaper than industrial tariffs. This is where most savings will come from. The amount saved will depend on how much of your load is covered. Be wary of any promised fixed percentage.
  2. Payback: Many rooftop and ground mounted solar projects with a good location will provide a payback of around 3-6 years. Carports will generally take longer. This will depend on your tariff, cost of system, load profile and incentives.
  3. OPEX: If you don’t want to invest into solar then you can purchase it through a PPA or group captive model. This means you will pay a fixed rate for the solar energy with little/no initial investment.
  4. Tax & Incentives: Depreciation, state policies and renewable certificates can improve the returns however can change frequently. This will depend on your tax regime. Ensure you check with your tax adviser what the current situation is.
  5. Lifetime: Modules usually have a 25 year performance warranty. Output will reduce gradually over time, typically around 0.4-0.55% per year. You will need to allow for inverter replacement.

Comparing Solar for Automotive Deployment Options

Parameter Rooftop solar panels Ground mount solar Solar carports
Space needed Existing plant roofs Open land within or near the plant Parking lots and vehicle yards
Typical capacity From about 500 kW to several MW, limited by roof area Multi-MW to utility scale From about 200 kW to several MW, limited by parking area
Upfront prep Structural check, waterproofing review, roof clamps or sealed fixings Land grading, foundations, fencing Steel canopy structures, foundations, wind design
Relative cost per kW Lowest Low to moderate Highest
Dual use Uses unused roof space Needs dedicated land Generates power and shades vehicles
Main advantage Quick payback, no land cost Highest energy yield per kW Gets value from existing parking and yard land
Watch out for Roof age, heat near paint and heat treatment areas, vibration Land availability and cost Vehicle clearances, wind loads, longer payback

FAQs: Solar for Automotive Industry

Q1: How will solar help automotive manufacturers meet OEM targets?
Ans: OEMs will take into account the emissions produced at a suppliers site and so Tier-1 & Tier-2 suppliers will be asked to reduce these. Solar will reduce your Scope 2 emissions by reducing the amount of grid electricity you are using. This means you can demonstrate good progress to your customers. However, it will not reduce the fuel used in processes.
Q2: Can solar cope with high demand from presses and robotic lines?
Ans: Solar for automotive will reduce the amount of electricity you are drawing from the grid, however it will not automatically provide high load demands. In a grid tie or hybrid system these high loads will be drawn from the grid (and optionally battery). Solar will provide some of the steady load demands. A good design will ensure that the quality of the power is maintained for a smooth operation between inverters and plant equipment.
Q3: What is the usual payback period for solar in an automotive plant?
Ans: Most roof mounted and ground mounted schemes can have a payback period of around 3-6 years. They will then produce renewable energy for 20+ years. Carports tend to have a longer payback due to the steel structure. This will depend on your tariff, cost of system, incentives and load profile.
Q4: Roof mounted, ground mounted or car ports - Which's best?
Ans: This depends on your available space and what you want to achieve. Roof mounted will give you the quickest return and usually the lowest cost per kW. Ground mounted can be scaled more and will generate more. If you have lots of parking or yard space, carports will make sense. Many sites will use a combination of 2 or 3.
Q5: Can I use solar to charge EVs on site?
Ans: Yes! Solar for automotive can be used to charge EVs for employees, fleet and testing. Carports offer a convenient place to charge. Charging during daylight hours will also match up with solar generation.
Q6: Will solar cause any disruption to production?
Ans: No, if planned correctly. The installers will plan the work to fit around shift patterns, create safe working areas and plan any downtime for electrical connections. By coordinating early with your maintenance and safety teams there should be minimal disruption.

Get a Project-Specific Cost Estimate

Share This Article

✓

Thank You

Your request has been submitted successfully.
Our team will get back to you shortly.