Solar for Textile Industry

November 07, 2026 | Satya Narayan Pandey | 7 Min Read

Textile is an energy intensive industry. Running, spinning, weaving, knitting, and processing each garment unit take a lot of electricity. Solar for textile industry allows you to take back control over your electricity costs and can reduce both your electric bill and your carbon footprint.

Overview

  • Reduced Power Costs: Solar units can often significantly reduce the cost of your power, particularly during peak periods of your machines running.
  • Sustainable for Buyers: Being able to provide cleaner electricity means you can meet the demands of global apparel and home textile brands on energy and carbon.
  • Versatile: Install solar for textile on the roof of your sheds, utilise any spare land or look at offsite options using group captive and PPA models.

Why Manufacturers are going for Solar for Textile Industry

Textiles is a high energy consuming industry. From spinning frames to looms, knitting machines, compressors, humidification and cooling systems all require a large amount of running time. For many, electricity becomes one of the main costs (after raw materials and labour).

There are three reasons driving the use of solar for textile:

  • Costs Increasing: Industrial tariffs and surcharges can often increase over time.Solar for textile reduces a large chunk of your energy cost during the day for the next 25 years.
  • Buyer Requirements: Many large fashion and home textile brands have climate goals. The emissions produced by your factory will contribute to their supply chain footprint. Many are asking for suppliers to provide them with energy information and actions to reduce. Those that can demonstrate a clean energy strategy will stand out.
  • Competitive advantage: Cheaper energy to give a competitive edge on your pricing. Cleaner energy to retain and win orders.

The global textile and apparel industry contributes between approximately 6-10% of global emissions. A large proportion of these emissions come from energy usage. This is why brands are keen to understand the energy used by their suppliers.

How Solar for Textile Works?

It is important to consider how your plant operates.

  1. Energy Usage: Spinning frames, looms, knitting machines, compressors, air washers and chillers are all generally the largest users. solar for textile will offset the overall energy drawn from your plant meaning no specific wiring is required.
  2. Peak Day Usage: Textile mills operate throughout the day meaning most of the generated energy will be used onsite.
  3. 24/7 Mills: Many spinning units operate 24/7. solar for textile will offset a portion of your annual usage - typically between 15-35% for a rooftop system. Larger ground or offsite will increase this amount. A feasibility study will show you exactly how much.
  4. Storage: Storage can be used to reduce your peak demand charges or move the energy to the evening. However this will only make sense if your tariff has incentives.
  5. Grid: During the night and cloudy periods the grid will be used. No risk to your production.

Costs of Solar for Textile

  1. Unit Cost: solar for textile will generally be cheaper than industrial tariffs. This is where most of your savings will come from. How much you save on your overall power bill will depend on how much of your load is offset by solar. Be wary of those who say you’ll save a set amount.
  2. Payback: Many well located industrial projects will have a payback period of approx 3-6 years. This will depend on your tariff, system cost, load profile and incentives.
  3. Operational Expenditure: If you do not wish to invest capital you can utilise a PPA or group captive model to purchase your solar for textile  at an agreed rate with little or no upfront costs.
  4. Tax & Incentives: Depreciation, state policies and renewable certificates can improve your returns. However these often change and will depend on your tax regime. Ensure you know what the current set up is with your tax adviser.
  5. Lifespan: Modules typically have 25 year performance guarantees. Output will reduce gradually, typically around 0.4-0.55% per year. You should expect to replace your 

Comparing Solar for Textile Deployment Options

Parameter Rooftop solar panels Ground mount solar Off-site (group captive / PPA)
Space needed Existing plant roofs Open land at or near the plant None at your plant
Typical capacity From about 300 kW to several MW, limited by roof area Multi-MW to utility scale Multi-MW to utility scale
Upfront prep Roof strength check, waterproofing, possible re-roofing Land grading, foundations, fencing Contracts and open access approvals
Maintenance Roof walkways, lint and dust control, robotic cleaning option Easy ground access, simple washing and tracker upkeep Handled by the project developer
Yield Limited by roof tilt and orientation Highest with trackers and bifacial modules Depends on the chosen site
Main advantage No land cost, quick to install More kWh per kW, room to expand Large renewable share with low capex
Watch out for Roof age, shading, fire safety Land availability and cost Transmission and open access charges, policy changes

FAQs: Solar for Textile

Q1: How can solar help textile units remain competitive?
Ans: More global clothing and home textiles brands want lower emissions from their suppliers, to reduce the overall emissions footprint from their supply chains. By reducing your proportion of electricity used from solar you will reduce your carbon intensity. This will improve your sustainability story and increase your margin.
Q2: Do lint and dust impact the efficiency of my solar panels?
Ans: If there is lint and fine dust it will reduce the output of the modules. It will depend on how close you are to the dusty processes. Having a regular cleaning regime, correct tilt and using anti-soiling coatings will help. Cost of cleaning should be considered within your business case.
Q3: What is the typical payback period for solar in a textile mill?
Ans: Many industries have a payback period of between 3-6 years. From this point they will be generating power for 20+ years. As most of the solar will be consumed during the day you will have a high consumption rate. Your results will depend on your tariff, cost of installation, incentives and load profile.
Q4: Should I go for a rooftop or ground mount?
Ans: This will depend on your roof space, land availability and load. Rooftop will be quicker to install and utilise unused space. Ground mount will give you more energy per kW and can scale up more. Many textile mills will start with rooftop and build out with ground mount or off site.
Q5: Is rooftop solar safe?
Ans: Yes it is if it is correctly designed and installed. Key factors include ensuring the structure will hold the weight, having good waterproofing, quality electrical components, safe cabling to reduce risk of fire and having a good housekeeping regime to prevent lint building up.
Q6: Can I run my mill 24/7 with solar?
Ans: No, solar only generates during daylight hours. This means that it will reduce the amount of energy you take from the grid. You can however install batteries or purchase hybrid renewable energy to increase this.

Get a Project-Specific Cost Estimate

Share This Article

✓

Thank You

Your request has been submitted successfully.
Our team will get back to you shortly.